fix:部分机板开机画面亮度低；关机充电花屏

1. 解决部分模组开机界面暗
2. 解决关机状态下，充电前面两个充电标志正常，后面电池报警图标花屏

project/ISP568.uvprojx

@@ -10,14 +10,14 @@
       <TargetName>ISP568</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pArmCC>5060750::V5.06 update 6 (build 750)::ARMCC</pArmCC>
+      <pArmCC>5060750::V5.06 update 6 (build 750)::.\Arm Compiler 5.06 update 6 (build 750)</pArmCC>
-      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::.\Arm Compiler 5.06 update 6 (build 750)</pCCUsed>
       <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>ARMCM0</Device>
           <Vendor>ARM</Vendor>
-          <PackID>ARM.CMSIS.5.5.1</PackID>
+          <PackID>ARM.CMSIS.5.8.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
           <Cpu>IRAM(0x20000000,0x00020000) IROM(0x00000000,0x00040000) CPUTYPE("Cortex-M0") CLOCK(12000000) ESEL ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
@@ -50,7 +50,7 @@
             <InvalidFlash>1</InvalidFlash>
           </TargetStatus>
           <OutputDirectory>.\Objects\</OutputDirectory>
-          <OutputName>WL568_S21_NT37701_20230403</OutputName>
+          <OutputName>WL568_S21_NT37701_20230522</OutputName>
           <CreateExecutable>1</CreateExecutable>
           <CreateLib>0</CreateLib>
           <CreateHexFile>1</CreateHexFile>
@@ -186,6 +186,7 @@
             <uocXRam>0</uocXRam>
             <RvdsVP>0</RvdsVP>
             <RvdsMve>0</RvdsMve>
+            <RvdsCdeCp>0</RvdsCdeCp>
             <hadIRAM2>0</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>16</StupSel>
@@ -352,7 +353,7 @@
             <NoWarn>0</NoWarn>
             <uSurpInc>0</uSurpInc>
             <useXO>0</useXO>
-            <uClangAs>0</uClangAs>
+            <ClangAsOpt>4</ClangAsOpt>
             <VariousControls>
               <MiscControls></MiscControls>
               <Define></Define>
@@ -393,62 +394,6 @@
               <FileType>1</FileType>
               <FilePath>..\src\app\demo\ap_demo.c</FilePath>
             </File>
-            <File>
-              <FileName>app_tp_for_custom_s8.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\src\app\demo\app_tp_for_custom_s8.c</FilePath>
-              <FileOption>
-                <CommonProperty>
-                  <UseCPPCompiler>2</UseCPPCompiler>
-                  <RVCTCodeConst>0</RVCTCodeConst>
-                  <RVCTZI>0</RVCTZI>
-                  <RVCTOtherData>0</RVCTOtherData>
-                  <ModuleSelection>0</ModuleSelection>
-                  <IncludeInBuild>0</IncludeInBuild>
-                  <AlwaysBuild>2</AlwaysBuild>
-                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
-                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
-                  <PublicsOnly>2</PublicsOnly>
-                  <StopOnExitCode>11</StopOnExitCode>
-                  <CustomArgument></CustomArgument>
-                  <IncludeLibraryModules></IncludeLibraryModules>
-                  <ComprImg>1</ComprImg>
-                </CommonProperty>
-                <FileArmAds>
-                  <Cads>
-                    <interw>2</interw>
-                    <Optim>0</Optim>
-                    <oTime>2</oTime>
-                    <SplitLS>2</SplitLS>
-                    <OneElfS>2</OneElfS>
-                    <Strict>2</Strict>
-                    <EnumInt>2</EnumInt>
-                    <PlainCh>2</PlainCh>
-                    <Ropi>2</Ropi>
-                    <Rwpi>2</Rwpi>
-                    <wLevel>0</wLevel>
-                    <uThumb>2</uThumb>
-                    <uSurpInc>2</uSurpInc>
-                    <uC99>2</uC99>
-                    <uGnu>2</uGnu>
-                    <useXO>2</useXO>
-                    <v6Lang>0</v6Lang>
-                    <v6LangP>0</v6LangP>
-                    <vShortEn>2</vShortEn>
-                    <vShortWch>2</vShortWch>
-                    <v6Lto>2</v6Lto>
-                    <v6WtE>2</v6WtE>
-                    <v6Rtti>2</v6Rtti>
-                    <VariousControls>
-                      <MiscControls></MiscControls>
-                      <Define></Define>
-                      <Undefine></Undefine>
-                      <IncludePath></IncludePath>
-                    </VariousControls>
-                  </Cads>
-                </FileArmAds>
-              </FileOption>
-            </File>
             <File>
               <FileName>app_tp_transfer.c</FileName>
               <FileType>1</FileType>
@@ -521,7 +466,7 @@
                     <NoWarn>2</NoWarn>
                     <uSurpInc>2</uSurpInc>
                     <useXO>2</useXO>
-                    <uClangAs>2</uClangAs>
+                    <ClangAsOpt>0</ClangAsOpt>
                     <VariousControls>
                       <MiscControls></MiscControls>
                       <Define></Define>
@@ -567,4 +512,13 @@
     </files>
   </RTE>
 
+  <LayerInfo>
+    <Layers>
+      <Layer>
+        <LayName>ISP568</LayName>
+        <LayPrjMark>1</LayPrjMark>
+      </Layer>
+    </Layers>
+  </LayerInfo>
+
 </Project>

project/RTE/_ISP568/RTE_Components.h

@@ -0,0 +1,21 @@
+
+/*
+ * Auto generated Run-Time-Environment Configuration File
+ *      *** Do not modify ! ***
+ *
+ * Project: 'ISP568' 
+ * Target:  'ISP568' 
+ */
+
+#ifndef RTE_COMPONENTS_H
+#define RTE_COMPONENTS_H
+
+
+/*
+ * Define the Device Header File: 
+ */
+#define CMSIS_device_header "ARMCM0.h"
+
+
+
+#endif /* RTE_COMPONENTS_H */

src/app/demo/ap_demo.c

@@ -153,7 +153,7 @@ uint8_t phone_DisplayOFF_flag=0;
 #endif
 
 
-
+static uint32_t curFrame = 0;
 /// 清晰度较好
 uint32_t rx_filter_1080_h_4_96[32][2] =
 {
@@ -324,6 +324,7 @@ static void ap_reset_cb(void *data)
 #endif
 
 
+static bool isStart = false;
 static bool ap_dcs_read(uint8_t data_type, uint8_t dcs_cmd, uint8_t param)
 {
 #ifdef USE_FOR_SUMSUNG_S21
@@ -549,6 +550,7 @@ static bool ap_dcs_read(uint8_t data_type, uint8_t dcs_cmd, uint8_t param)
 		{
 			TAU_LOGD("r[%x] [%d] err\r\n", dcs_cmd, return_size);
 		}
+		isStart = true;
 	}
 	else if (dcs_cmd == 0x0A)
 	{
@@ -4759,7 +4761,17 @@ static void init_panel(void)
 }
 
 
-
+static void frame_start_cb(hal_rx_dbg_event_e event)
+{
+	curFrame++;
+	if((isStart)&&(curFrame==4))
+	{
+		hal_dsi_rx_ctrl_stop(g_rx_ctrl_handle);
+		hal_dsi_rx_ctrl_init(g_rx_ctrl_handle);
+		hal_dsi_rx_ctrl_start(g_rx_ctrl_handle);
+		TAU_LOGD("RX RST\n"); 
+	}
+}
 static void open_mipi_rx(void) 
 {
     /* 配置TE引脚 */
@@ -4791,6 +4803,7 @@ static void open_mipi_rx(void)
     g_rx_ctrl_handle->base_info.extra_info.rot_angle = VIDOE_ROT_ANGLE_0; 
     g_rx_ctrl_handle->base_info.extra_info.mirror_en = false; 
     g_rx_ctrl_handle->base_info.extra_info.ltpo = true;  
+	g_rx_ctrl_handle->rx_debug_cb = frame_start_cb;
 #endif
 
     /* 提前预置PPS,  AP 有PPS cmd也会更新 */

src/app/demo/app_tp_transfer.c

@@ -16,6 +16,7 @@
 #include "tau_log.h"
 #include "tau_delay.h"
 #include "app_tp_st_touch.h"
+#include "hal_dsi_tx_ctrl.h"
 
 #if 1//def AP_TP_TRANSFER
 uint8_t read_point;							//当前要读的报点数。一个报点8BYTE数据
@@ -420,6 +421,8 @@ void S20_Start_init(void)
 	uint8_t len=0;
 	uint8_t temp=0;
 	uint8_t temp_start_flag=0;	
+    
+    hal_dsi_tx_ctrl_write_cmd(0x29, 0, 3, 0x51, 0x07, 0xff);
 	//    if(phone_start_flag==1)
 	{
 		app_tp_m_read(screen_reg_int_data[0].buffer, 1, s_screen_read_buffer, 8);

src/sdk/include/hal_flash.h

@@ -0,0 +1,109 @@
+/*******************************************************************************
+*
+*
+* File:        hal_system.h
+* Description  hal 通用系统接口头文件
+* Version      V0.1
+* Date         2023-03-03
+* Author       kevin
+ *******************************************************************************/
+#ifndef __HAL_FLASH_H__
+#define __HAL_FLASH_H__
+/*******************************************************************************
+* 1.Included files
+*******************************************************************************/
+#include "tau_common.h"
+
+/*******************************************************************************
+* 2.Global constant and macro definitions using #define
+*******************************************************************************/
+
+/*******************************************************************************
+* 3.Global structures, unions and enumerations using typedef
+*******************************************************************************/
+
+/*******************************************************************************
+* 4.Global variable extern declarations
+*******************************************************************************/
+
+/*******************************************************************************
+* 5.Global function prototypes
+*******************************************************************************/
+
+/**
+* @brief  初始化flash 模块,使用完flash模块后需要deinit用于节省功耗
+* @param
+* @retval bool  无
+*/
+void hal_flash_init(void);
+
+/**
+* @brief  关闭flash 模块
+* @param
+* @retval bool  无
+*/
+void hal_flash_deinit(void);
+
+
+/**
+* @brief  flash ctl读取flash-uid操作
+* @param  UID[16] 存放UID的数组,UID最大长度为16
+* @param  UID 数组长度(最大16)
+* @retval
+*/
+void hal_flash_read_uid(uint8_t *UID, uint8_t size);
+
+/**
+* @brief
+* @param   flash_block:0-13，选择对应的block进行擦除,启动对某个block写之前需要先擦除对应64K数据
+* @retval
+*/
+bool hal_flash_erase(uint8_t flash_block);
+
+
+/**
+* @brief  用户字节数组形式从flash读取数据,按页读取，每页1024字节
+* @param  *usr_cfg_t_addr(数组首地址),
+          usr_cfg_t_size(数组大小可以超过1024,超过1024时为跨页连续读)
+          flash_block:选择操作的block(0-13,其中0-3为TDDI         Flash区域)
+          flash_page :(一个block 页0~63)
+          page_offset_addr:block = 64K
+* @retval bool  无
+*/
+bool hal_flash_normal_read(uint8_t *usr_cfg_t_addr,
+                           uint16_t usr_cfg_t_size,
+                           uint8_t flash_block,
+                           uint16_t flash_page,
+                           uint16_t page_offset_addr);
+
+/**
+* @brief  用户字节数组形式存入flash(次数有限，不可频繁写入),按页写入，每页1024字节
+         注意:写入某个block前确认使用hal_flash_erase进行擦除整个blocK,才能对该block的0-63page进行写入
+* @param  *usr_cfg_t_addr(数组首地址),
+         usr_cfg_t_size(数组大小可以超过1024,超过1024时为跨页连续写)
+         flash_block:选择操作的block(0-13,其中0-3为TDDI Flash区域)
+         flash_page （一个block 0~63页）
+         page_offset_addr:0-1023 byte
+* @retval bool  校验size是否超出
+*/
+bool hal_flash_normal_write(uint8_t *usr_cfg_t_addr,
+                            uint16_t usr_cfg_t_size,
+                            uint8_t flash_block,
+                            uint16_t flash_page,
+                            uint16_t page_offset_addr);
+
+/**
+* @brief  发送0xAB指令控制flash退出deep sleep power mode
+* @param  none
+* @retval null
+*/
+void hal_flash_release_power_down(void);
+
+/**
+* @brief  发送0xB9指令控制flash进入deep sleep power mode
+* @param  none
+* @retval null
+*/
+void hal_flash_power_down(void);
+
+#endif //__HAL_FLASH_H__